Produse marca VERDELLI - Handling equipment

VERDELLI - Handling equipment

Electro-Hydraulic equipmentsHydraulic equipmentsAutomatic equipmentsMechanics equipments

Timber electro-hydraulic grabs
Machinery used for handling timber and trunks of wood; internally fitted with a hydraulic power unit designed to keep the pressure in the cylinders constant, in order to prevent losing the load. There are two versions of this machinery available: one version for picking up bands and blocking the wood with cables held in tension by springs; the second version is used for larger trunks of wood with tips which can pick up single trunks of wood. ...

Electro-Hydraulic equipments

Electro-hydraulic orange peel grabs
The electro-hydraulic orange peel grabs in the P.E. series come supplied, internally, with a hydraulic power unit and electric distributor to control the opening and closing movement. This power unit was created with a mechanical mechanism which makes it easier for the machinery to work for prolonged periods of time, preventing the oil overheating and thus wear and tear on the washers, pipes and the entire structure. The light series is used for material handling with a low specific weight (such as refuse). The heavy orange peel grab, on the other hand, is used for heavy duty w ...

Electro-Hydraulic equipments

Electro-hydraulic clamshell grabs
The clamshell grabs in the M.E.O.2 series come supplied, internally, with a hydraulic power unit and electric distributor to control the opening and closing movement. This power unit was created with a mechanical mechanism which makes it easier for the machinery to work for prolonged periods of time, preventing the oil overheating and thus wear and tear on the washers, pipes and the entire structure. The clamshell grabs use two cylinders with appropriate bores, to ensure their clamping strength and speed. Due to its structure, this machinery is used to move light material in places wit ...

Electro-Hydraulic equipments

Electro-hydraulic four cylinders clamshell grabs
The electro-hydraulic clamshell grabs in the M.E.V.4 series have four slave cylinders, used for digging and cleaning pits. Their clamping strength means they can carry out heavy duty digging, such as moving coal and cement. The clamshell grabs are fitted with a power unit especially designed to ensure the machinery works perfectly. The clamshell grabs can also be supplied in watertight versions for deep work. ...

Electro-Hydraulic equipments

Hydraulic orange peel grabs
The orange peel grabs in the P.I. series are fitted on hydraulic or cable excavators or machinery with a hydraulic circuit which allows the machinery to move. This machinery has been designed for heavy duty work, such us handling boulders for rocky beaches, moving iron or high specific weight material. This kind of orange peel grab can also be built in a low version, so it can be fitted onto a crane on a lorry. Top quality material is used in manufacturing as well as the best components available on the market, thus ensuring that the machinery will be long lasting and capable of ...

Hydraulic equipments

Scrap hydraulic
The low hydraulic orange peel grabs with separate double-acting cylinders are especially designed for moving scrap, waste etc.; they can be fitted to any kind of automatic crane, ensuring fast movement, durability and clamping strength. The shells are made with anti-wear and tear material and have been designed for a perfect hold on material. The machinery is fitted with 360 degrees continuous hydraulic rotation. ...

Hydraulic equipments

Hydraulic clamshell grabs
The clamshell grabs in the M.I.O.2 series are applicable to excavators or bridge cranes, which use a hydraulic circuit in order to operate. The clamshell grabs use two cylinders with appropriate bores, to ensure their clamping strength and speed. This kind of grab is used for digging (for example, marine excavations), with low specific weight material. Top quality material is used in manufacturing as well as the best components available on the market, thus ensuring that the machinery will be long lasting and capable of carrying out work in the most difficult situations. ...

Hydraulic equipments

	Hydraulic four cylinders clamshell grabs The hydraulic clamshell grabs in the M.I.V.4 series have four slave cylinders, used for digging and cleaning pits. Thanks to their clamping strength, they can carry out heavy duty digging. This machinery can be connected up to port cranes, cable excavators or bridge cranes, fitted with hydraulic systems to operate the clamshell grab. ...
Hydraulic equipments

	-M.I.V. series- Hydraulic clamshell grabs The hydraulic clamshell grabs in the M.I.V. series are fitted with a vertically positioned cylinder. Due to its strength, the machinery can carry out digging work with hard material. This clamshell grab can be connected up to hydraulic excavators, fitted with a hydraulic system to make it work. ...
Hydraulic equipments

-T.I. Series- Hydraulic grabs
The hydraulic pincers in the T.I. series is a piece of equipment fitted, on request, with a differing number of jaws. The machinery is used for handling asymmetrical objects. Thanks to the separate claws, this machinery adapts itself to different shapes. Thanks to this particular characteristic, the pincers can be used, for example, for handling blocks used on rocky beaches. This pincers can be connected up to hydraulic excavators, fitted with a hydraulic system to make it work. ...

Hydraulic equipments

	-F.I. Series- Timber hydraulic grabs The machinery in the F.I. series is used for handling timber. There are two versions of this machinery available: one version for picking up bands and blocking the wood with cables held in tension by springs; the second version is used for larger trunks of wood with tips which can pick up single trunks of wood. ...
Hydraulic equipments

	Automatic Grabs This kind of equipment can be fitted onto machinery where there is neither a hydraulic nor electric system, essential for the running of other machinery. In fact, moving is carried out thanks to internal mechanisms: it closes with the contact on material and opens thanks to a hook or a mechanical or electric remote control. ...
Automatic equipments

Double-rope orange peel grabs
The mechanical orange peel grabs in the P.M.2 series are fitted onto excavators or two cable bridge cranes. One cable for up and down movements and another for opening and closing. The machinery, depending on the pulleys on the excavator or on the bridge crane, can be set according to the different diameters of the pulleys available on the market. The light series is used for material handling with a low specific weight (such as refuse). The heavy orange peel grab, on the other hand, is used for heavy duty work (such as steelworks). Top quality material is used in ...

Mechanics equipments

Four-rope orange peel grabs
The mechanical scrap grabs in the P.M.4 series are fitted onto excavators or four cable bridge cranes. Two cables for up and down movements and another two for opening and closing. The machinery, depending on the work to be done, can be produced in two different versions, which differ in their structural design. The light series is used for moving material with a low specific weight (such as refuse). The heavy orange peel grab, on the other hand, is used for heavy duty work (such as steelworks). Top quality material is used in manufacturing as well as the bes ...

Mechanics equipments

Double-rope clamshell grabs
The mechanical clamshell grabs in the M.M.2 series are fitted onto excavators or two cable bridge cranes. One cable for up and down movements and another for opening and closing. The machinery, depending on the pulleys on the excavator or on the bridge crane, can be set according to the different diameters of the pulleys available on the market. The clamshell grab is used for digging or material handling of varying dimensions (e.g. coal or wheat). Two kinds of grabs are made for the different kinds of material: The light series is used for material handling with a low spec ...

Mechanics equipments

Four-rope clamshell grabs
The mechanical clamshell grabs in the M.M.4 series are fitted onto excavators or four cable bridge cranes. Two cables for up and down movements and another two for opening and closing. The machinery is used for handling, particularly for ship unloading in ports. Different kinds of grabs are used for the different kinds of material, which differ in their structural design. Top quality material is used in manufacturing as well as the best components available on the market, thus ensuring that the machinery will be long lasting and capable of carrying out work in the m ...

Mechanics equipments

	Trimmer grabs This machinery is fitted to port cranes with two windlasses to make them run and for up/down movement, using four cables. The trimmer grabs are especially designed for ship unloading because their particular shape allows them to reach into every corner of the hold for maximum unloading of all the existing material. ...
Mechanics equipments

-T.M. Series- Rock grabs
Suitable for placing boulders in the construction of rocky beaches, the mechanical pincers can be attached to a cable excavator with two maneuvering windlasses. The different versions are supplied with three, four or five claws, according to the client's needs and the shape of the boulder to be moved. The claws are made of special anti-wear and tear steel and reinforced internally. ...

Mechanics equipments