ON SITE MACHINE "Series MDC"
In the past the raw material has always been transported to be refined and worked where the machine was located. Now we have decided to change this approach by designing a machine which can be taken on site to where the stone is located.
600 kg off practical simplicity
Useful for splitting stone that is to be used for cladding, breaking cement and all those situations where there is the necessity to re-use materials, practical in situations such as road building, construction sites, on-site at the quarry or at the test lab. Material therefore only needs to be transported once and thus saving on costs, while increasing productivity and safety of the operators.
Transportable easily!!!!
Transportable with a pick-up or small truck. It can be loaded by small crane thanks to the rings located on the top of the frame or by fork-lift thanks to the slots located on the feet of machine.
Norms
The MDC machine is supply with safety command in according to the European rules complete with instruction's manual for use and maintenance and declaration of conformity CE. The frame is studied and produced to supply the better guarantee of robustness and life. It is ideal for the work that has to do and it is check from an engineering that work with the University of Trento (Italy). All the welding on machine is done follow the certificated procedure of the Italian Institute of Welding in according of rule EN 15614:2004 The welding are done from the skilled worker with licence issued from ITALIAN INSTUTE of WELDING following the rule EN 287:2004.
| Series "MDC MOBILE" with blades with adjustment tols: | |
| Width blade: | 480 mm |
| Tools adjustment: | 10 mm upper 10 mm lower |
| Tools number: | 12 upper 12 lower |
| Stone's passage: | 610 mm |
| Splitting height: | 310 mm |
| Splitting power: | 36 tons |
| Supply voltage: | 400 V - 50 Hz three-phase (1 motor 3 kW) |
| Hydraulic tank and electric panel are anchored at machine to have only one piece. This to move and use the machine easily. | |