Series MDC FIX
ON SITE MACHINE "Series MDC"
In the past the raw material has always been transported to be refined and worked where the machine was located. Now we have decided to change this approach by designing a machine which can be taken on site to where the stone is located.
600 kg off practical simplicity
Useful for splitting stone that is to be used for cladding, breaking cement and all those situations where there is the necessity to re-use materials, practical in situations such as road building, construction sites, on-site at the quarry or at the test lab. Material therefore only needs to be transported once and thus saving on costs, while increasing productivity and safety of the operators.
Transportable easily!!!!
Transportable with a pick-up or small truck. It can be loaded by small crane thanks to the rings located on the top of the frame or by fork-lift thanks to the slots located on the feet of machine.
Norms
The MDC machine is supply with safety command in according to the European rules complete with instruction's manual for use and maintenance and declaration of conformity CE. The frame is studied and produced to supply the better guarantee of robustness and life. It is ideal for the work that has to do and it is check from an engineering that work with the University of Trento (Italy). All the welding on machine is done follow the certificated procedure of the Italian Institute of Welding in according of rule EN 15614:2004 The welding are done from the skilled worker with licence issued from ITALIAN INSTUTE of WELDING following the rule EN 287:2004.
Technical information
| Series "MDC FIX" with fixed blades: | |
| Width of blade: | 500 mm |
| Blade mobile: | 3° right 3° left |
| Stone's passage: | 610 mm |
| Splitting height: | 310 mm |
| MDC FIX has different models: | |
| 1° Model: | |
| Splitting power: | 20 tons |
| Supply voltage: | 220 V - 50 Hz mono-phase (1 motor 2,2 kW) |
| Total weight: | 600 kg |
| 2° Model: | |
| Splitting power: | 20 tons |
| Supply voltage: | 400 V - 50 Hz three-phase (1 motor 3 kW) |
| Total weight: | 700 kg |
| 3° Model: | |
| Splitting power: | 36 tons |
| Supply voltage: | 400 V - 50 Hz three-phase (1 motor 3 kW) |
| Total weight: | 750 kg |
| Hydraulic tank and electric panel are anchored at machine to have only one piece. This to move and use the machine easily. | |
Image gallery
Presentation movies
Copyright © 2012 SC POEMA SRL. Powered by MaD DucK